Automatic and manual degreasing machines
Our range of degreasing machines offer real solutions to the cleaning and degreasing of aircraft brakes, wheels and other components.
As you are well aware, removing stubborn grease and brake dust in particular on aircraft brake parts is a real problem. High-pressure washing unfortunately will not remove baked on brake dust and we have found that a manual wash after a high-pressure detergent wash at approximately 60 degrees is the only answer.
The ODL115AM full stainless steel fabrication has a 1150mm
electronically
controlled rotating basket in the bottom of the machine. Two high-pressure
pumps delivery 220 litres per minute can initially wash the parts
automatically in hot detergent (not solvent). After the wash cycle is
complete the operator can put his arm through the sleeve rings and use the
range of manual tools to agitate the stubborn dirt, followed by a further
automatic wash.
- Hand operated high pressure gun 100 bar
- Hand operated detergent fed agitating brush
- Hand operated pressure air wash gun
- Hand operated needle jet gun 6 bar
The upper part of the machine has a large viewing window and internal
illumination for good operator visibility. An optional trolley for removal
of the basket and components to transfer them to the next workstation is an
invaluable extra for the wheel and brake overhaul shop.
